The A-4 tactical sniper stock was originally designed for the USMC. The optional adjustable saddle type cheekpiece is comfortable and efficient. The forend is similar to the A-2 but with the bottom dropped to be parallel to the top. It has a vertical pistol grip and a butt hook for better control of the butt with the non-trigger hand. It is available with fixed length of pull or adjustable spacer system. The A-4 will accommodate all Remington 700 type and Winchester Model 70 type actions. The stock is ambidextrous and may be inletted for either right and left hand. Now also available with either of the integral cheekpiece options.
|FLAT TOP (No Inlet)||$338|
|BASIC INLET (INCLUDES: Action Outline & Barrel Channel)||$390|
|FULL INLET (INCLUDES: Action, Floorplate & Barrel Channel||$548|
|MOLDED IN FINISHES (Marble, Spectre, Ambush, Camo)||$65.00|
|PAINT (Solid, Transition Camo, Speckletone)||(Paint is Included in Stock Price)|
|EDGE® TECHNOLOGY UPDGRADE (includes machined-in aluminum pillars)||$100.00|
|2-WAY VERTICAL BUTT PLATE||$128.00|
|2-WAY VERTICAL BUTT PLATE||$198.00|
|LIGHT WEIGHT 3-WAY ADJUSTABLE BUTT PLATE||$233.00|
|CLAMP BAR CHEEKPIECE HARDWARE w/ ROUND KNOB||$128.00|
|CLAMP BAR CHEEKPIECE HARDWARE w/ HEX HEAD SCREW||$128.99|
|CLAMP BAR CHEEKPIECE HARDWARE w/ STAR KNOB||$133.00|
|CLAMP BAR CHEEKPIECE HARDWARE w/ T-KNOB||$133.00|
|THUMBWHEEL CHEEKPIECE HARDWARE||$165.00|
|MAGNETIC THUMBWHEEL CHEEKPIECE HARDWARE||$206.00|
|SADDLE CHEEKPIECE HARDWARE||$135.00|
|SLING STUD (INSTALLED)||$8.00|
|FLUSHMOUNT BASE CUP (INSTALLED)||$14.00|
|LOCKING FLUSHMOUNT BASE CUP (INSTALLED)||$16.00|
|WICHITA FIXED 1.5” SLING LOOP (INSTALLED)||$90.00|
|MCMILLAN® 2” PICATINNY ACCESSORY RAIL (INSTALLED)||$47.99|
|MCMILLAN® 4” PICATINNY ACCESSORY RAIL (INSTALLED)||$52.99|
|MCMILLAN® 6” PICATINNY ACCESSORY RAIL (INSTALLED)||$67.99|
|MCMILLAN® 9” PICATINNY ACCESSORY RAIL (INSTALLED)||$69.99|
|SEEKINS® SRS™ 4” PICATINNY RAIL (INSTALLED)||$58.00|
|ANSCHUTZ® ACCESSORY RAIL (INSTALLED)||$58.00|
|FREELAND™ ACCESSORY RAIL (INSTALLED)||$58.00|
|BADGER® EFR MOUNT w/ SIDE RAILS (INSTALLED)||$319.00|
|MACHINED-IN ALUMINUM PILLARS (INSTALLED)||$28.00|
THE A4 WILL ACCEPT THE FOLLOWING ACTIONS:
*straight comb and saddle cheek piece available*
(if your action is not listed, please contact us and ask)
Bat HR & VR
Borden alpine & timberline
Dakota 76 (rifle must be sent in for fitting, fees may apply)
Lawton 7000, 7500, 8500
McMillan G30’s & Mcbros
Nesika j, k, l, s, m, c, t, v
Remington 600, 660, 700, 721, 722, 788, XP 100, XR 100, 40X, model 7
RPA Quadlite single shot
Savage – all staggerfeed models (DBM must be sent in for fitting), bling mag & single shot
– Centerfeed blind mag and single shot models only
– Target 3 screw
Stiller – all Remington clones
Surgeon – all models
Winchester -model 70’s, SPR, PBR, pre-64, pre-war clover leaf tang
For the finest presentation-grade surface, we suggest a painted finish. Six solid paint colors are available.
A new speckletone granite finish is also available. Choose any solid base coat color and specify either one or two speckletone paint highlights to create an attractive custom finish.
When you order any paint finish, the underlying stock is hand-sanded, primed, and painted to eliminate all surface imperfections. This is the finish most manufacturers specify for the McMillan stocks that are sold with their custom shop rifles.
The paint we use is an industrial grade, non-slip pebble finish similar to that found on power tools, office machines and industrial equipment. This polyurethane paint is the most durable we can find and is suitable for conditions found from the Arctic to the tropics. However, any painted finish will scratch when dragged over rocks, limbs and other hard surfaces. It is impervious to most gun cleaning solvents, but harsh solvents should be wiped off immediately.
Repainting an existing McMillan Stock
We can repaint any McMillan stock for our customers at a nominal charge.
Click on a stock to enlarge the photo
The Spectre Series is McMillan’s new molded-in finish that mimics aspects of digital camouflage. It is currently available in four different color schemes.
Click on a stock to enlarge the photo
Desert Ambush is the first offering of the Ambush series. The color pattern was developed for the desert terrain and foliage of the Southwestern United States.
Click on a stock to enlarge the photo
Molded-In Colors to Create a Unique Marble Pattern.
Molded in colors are the most durable finish we offer. With a molded finish, the color is impregnated into the gelcoat, or exterior surface layer of the stock. All of the molded-in finishes below should be considered utility-grade. Mold lines, sanding marks, fiberglass cloth and small imperfections may be visible.
Molded-in stocks are provided with a matte finish to minimize light reflection. After receiving your stock, some customers take it upon themselves to further wetblock sand and buff the surface to achieve a polished, warm luster finish. This is particularly attractive with marble patterns.
A molded-in stock will weigh several ounces more than a painted stock due to the additional resin material that is used.
We do our best to make your particular finish as attractive as possible. However, we are limited in what can be accomplished with molded-in colors. Solid colors, especially darker ones, produce the greatest challenge, whereas the camouflage patterns tend to look better because the various colors and shapes hide imperfections. Marbled colors offer the best choice for creating a finished look with a molded-in color.
A marble finish is created by swirling two or three different colors into the surface of the stock. The result is a beautiful effect that is unique to your stock. McMillan pioneered this finish, which has become a familiar hallmark of our brand.
Choose any 2 or 3 of the molded in colors to create a unique swirled marble pattern finish for your custom stock. Literally thousands of different patterns can be created, including any you see on our website.
No two stocks are ever made alike as the marbling action is totally random in occurence.
Click on a stock to enlarge the photo.
The most popular marble finishes are shown here. Virtually any color combination is possible and some color combinations are inherently more pleasing than others.
Note that a marble finish can be used as an effective camouflage pattern when using olive green, black, gray and other common camo colors.
Each finish is done by hand and it is impossible to duplicate any particular marble pattern. Because marbling is created in the mold under pressure, patterns are random and not controllable. Specific vertical or horizontal patterns are not possible. Also, colors will change shades somewhat due to the mixing of colors while the swirling is done. Marble stocks may not be returned because of dissatisfaction with the color. However, you may opt to have us paint the stock at our regular price.
The colors on the right are used to create molded-in swirled marble and camo finishes. Solid molded in colored stocks are not available from McMillan.
McMillan Uses Molded-In Colors to create a Unique Camouflage Finish
Standard Camouflage Patterns
Eleven basic camouflage patterns are standard order items. The colors are not painted on the surface, but are molded into the stock for durability when used in extreme environments. Many military units specify this finish for their tactical stocks, with the choice of colors dependent on the part of the world where the rifle will be deployed. Custom camo patterns of any three or four colors are optional at no extra charge.
Standard – The majority of our stocks are filled with standard fill, also called sporter fill. It is composed of fiberglass cloth and solid fiberglass throughout the forearm and action area. A dense 2 piece foam is used in the butt stock. This fill is used for all calibers up to and including .300 win mag.
Magnum – This fill is used for heaving recoiling and magnum caliber rifles, mainly on hunting stocks. It constructed the same as a standard fill except heavier, thicker and more dense fiberglass is used in the recoil lug and action area to withstand heavy recoil and be easier on the shooter. It will add about 6 ounces of weight to the stock. It will be used for anything above a .300 win mag caliber.
Sniper – This fill is mainly used on magnum calibers on our tactical stocks. It is the same as magnum fill except there is lightweight fiberglass in the butt stock, not foam. This is so hardware for adjustability can be installed onto the butt stock if so desired. With the fiberglass being in the butt, it also helps to balance out rifles with large barrel contours. It will add about 8-10 ounces to the stock.
You can also check out this blog that shows hundreds of different marble configurations: McMillan marble pictures.
On our website just click on “stock pricing” to see the current price list. Our price list is broken down into two basic sections where most stocks in that group are all priced the same. For the “Hunting and Sporting” type stocks look in the “hunting” section for the current price for a fully inletted blank. This price includes the color and finish of your choice. Now click or look in the “stock options or accessories list”. You will see many optional items here and the price each option will add to the base price. For a hunting stock you can choose from two different recoil pads and specify the length of pull. Just add the price of the pad you choose to the base price. Now for sling or bipod attachment points you can choose standard sling studs or flush cups for flush applications. Just choose what you want and how many and add those prices to the base price and pad price to get a total price for the stock.
In the Tactical and Competition stock section, look again to see the starting base price. These stocks typically have a more solid fiberglass filler material which requires slower inletting speeds and more inletting for stock options and accessories and are priced higher than the hunting stocks because of the increased CNC machine time. Again the base price includes the color and finish of your choice. Go to the stock options and accessories list. Not all stocks have all the options available for them so check with us if you have questions. If you want an adjustable cheekpiece, pick one of the three types available and add that price to the base price. Choose what you want on the butt – just a recoil pad or one of the adjustable butt assemblies and add that price. For sling or bipod attachments choose standard sling studs or flush cups and how many and add those prices. Decide if you want optional accessory rails and bipod studs and add the price. If you want pre-installed machined-in metal pillars around the guard screw holes just specify that and add the price. Now add everything up to get a total price of a stock equipped just the way you want it. In the accessories list you can order different sling loops, or a hand stop, or any of the other accessories that we carry. See, it’s really not that complicated once you work through it the first time.
For custom made to order stocks, delivery time varies depending on the number of orders we are working on at the time. To check the status of your current order please email firstname.lastname@example.org . Please allow 5-7 days for us to get back to you with the status of your order as we are extremely busy and must locate your stock among the thousands on the shop floor. We have stocks ready to ship located on the individual stock pages under the “In Inventory” tab. These stocks are updated weekly and there are some good deals on some custom stocks inlets.
Instructions of shipping firearms to McMillan:
In compliance with the ATF rules & regulations inside the United States, firearms are required to be shipped back to the address it was sent from or to a FFL holder.
We require all firearms shipped in a hard plastic gun case to protect them. Please include (inside the case) a letter with your name, address, daytime phone #, email address and instructions. If you have already ordered a stock, include the order date.
Please insure your rifle for the full value.
Basic Inlet – where the receiver outline and barrel channel are inlet. There are no screw holes, trigger, safety, bolt handle, recoil lug, bottom metal etc inlet at all, only the actions outline/diameter and the barrel channel is inlet with float. Many gun shops choose this option to keep stocks in their shop to finish up the inletting when a customer orders a build from them.
Full Inlet – is a total inlet of the stock to the customers rifle specs. There may be some minor fittng involved after you receive the stock especially if you order a stock for a mauser 98 or a custom action.
Custom drop in – is a complete inlet for your rifle to where upon receiving the stock, your rifle should drop right in, you can bolt it together and go shoot. There is no additional fitting needed. 80% of all our stock orders are done this way.
McMillan offers our customers two ways to purchase a McMillan stock. Buy our most popular stocks in inventory in our Retail Store or select a McMillan special, one-of-a-kind stock offered on the individual stock pages.
To place a custom order stock, please see the directions below.
There is no set “fixed” price on any of our stocks. Our pricing is designed to let all of our customers get just what they want (within limits) and not have to pay for anything they do not want or need.
Our price list is broken down into two basic sections where most stocks in that group are all priced the same. For the “Hunting and Sporting” type stocks look in the “hunting” section for the current price for a fully inletted blank. This price includes the color and finish of your choice.
In the Tactical and Competition stock section, look again to see the starting base price. These stocks typically have a more solid fiberglass filler material which requires slower inletting speeds and more inletting for stock options and accessories and are priced higher than the hunting stocks because of the increased CNC machine time. Again the base price includes the color and finish of your choice.
Now look in the “stock options or accessories list.” You will see many optional items here and the price each option or accessory will add to the base price. Just add the cost of each item to the base price.
There are three ways to order your McMillan fiberglass stock: