The A-3 Sporter design is based on customer demand. For years, shooters have purchased McMillan’s “A” series tactical stocks as precision rifles. Because McMillan’s “A” series are basically designed as prone stocks, the company received numerous requests for a version of the tactical stocks that retained its comfortable vertical pistol grip but was more suited to general hunting and offhand use. The A-3 Sporter is a variation of McMillan’s A-3 tactical stock but with the drop-at-heel lowered from 3/8” down to 1” for better stock position on the shoulder for offhand and sitting use. The forearm has been curved in at the top to a “semi-beavertail” type for a more positive grip when hand holding the rifle. The pistol grip is the same as the A-3 and Adjustable A3-5 stocks. The forearm can be inletted for sporting barrel contours up to a Remington Varmint or #5 Douglas type contour. It is an excellent stock for general hunting and field varmint use with the famous “A” series type pistol grip.
- Available in right and left hand configurations
Please contact us if you do not see your action listed.
REMINGTON AND REMINGTON CLONE ACTIONS
- AMERICAN PRECISION ARMS GENESIS
- AMERICAN RIFLE COMPANY MAUSINGFIELD
- AMERICAN RIFLE COMPANY NUCLEUS
- BAT VR ROUND 1.35″x8″
- BERGARA B14
- BIG HORN ORIGIN
- BIG HORN SR3
- BIG HORN TL3
- BORDEN ALPINE
- BORDEN RIDGELINE
- BORDEN TIMBERLINE
- CHRISTENSEN ARMS M14
- CURTIS CUSTOM AXIOM
- CURTIS CUSTOM HELIX
- CURTIS CUSTOM VECTOR
- DEFIANCE ANTI MOD 7, S700, XM, L700
- DEFIANCE DEVIANT ELITE
- DEFIANCE DEVIANT GA HUNTER
- DEFIANCE DEVIANT HUNTER
- DEFIANCE DEVIANT ULTRALIGHT HUNTER
- DEFIANCE DEVIANT TACTICAL
- DEFIANCE RUCKUS GA HUNTER MOD 7, S700, XM, L700
- DEFIANCE RUCKUS HUNTER MOD 7, S700, XM, L700
- DEFIANCE RUCKUS ULTRALIGHT HUNTER MOD 7, S700, XM, L700
- DEFIANCE RUCKUS TACTICAL MOD 7, S700, XM, L700
- DEFIANCE TENACITY MOD 7, S700, XM, L700
- DEFIANCE REBEL
- GA TEMPEST
- GA TEMPLAR
- GA TEMPLAR HUNTER
- GA TEMPLAR V2
- IMPACT PRECISION 737
- IMPACT PRECISION 787
- KELBLY ATLAS
- KELBLY ATLAS TACTICAL
- LONE PEAK ARMS FUZION
- LONE PEAK ARMS FUZION TI
- LONE PEAK ARMS RAZOR
- LONE PEAK ARMS RAZOR TI
- MACK BROTHERS EVO – SHORT ACTION
- MCMILLAN FIREARMS G30
- MCMILLAN FIREARMS G31
- MCMILLAN FIREARMS G32
- PIERCE – SHORT ACTION
- REMINGTON 40X
- REMINGTON 700
- REMINGTON MODEL 7
- REMINGTON XR100
- STILLER P1000 35″ DIAMETER – SHORT ACTION
- STILLER PREDATOR
- STILLER TAC 30/300
- STILLER TAC 338
- SURGEON 591/1086
- SURGEON XL – A5
- TERMINUS APOLLO
- TERMINUS KRATOS
- TERMINUS ZEUS
- ULTIMATUM DEADLINE (BOTTOM METAL MODIFICATION REQUIRED)
- VUDOO V-22 REPEATER
- VUDOO V-22S SINGLE SHOT
- VUDOO V-22 “THREE 60” REPEATER
- HOWA 1500
- SAKO AV
- SAKO QUAD
- TIKKA T1X
- TIKKA T3/T3X
- TIKKA T3/T3X CTR
- WEATHERBY VANGUARD
- WEATHERBY VANGUARD 2
- WINCHESTER MODEL 70
DROP AT COMB
DROP AT HEEL
DROP TO TOE
GRIP TO TIP
OVER ALL LENGTH
LENGTH OF PULL WITHOUT PAD
MAXIMUM ACTION DIAMETER
MAXIMUM BARREL CHANNEL CONTOUR
Colors and Finishes
For the finest presentation-grade surface, we suggest a painted finish. Seven solid paint colors are available.
Speckletone granite finishes are also available. Choose any solid base coat color and specify either one or two speckletone paint highlights to create an attractive custom finish.
When you order any paint finish, the underlying stock is hand-sanded, primed, and painted to eliminate all surface imperfections. This is the finish most manufacturers specify for the McMillan stocks that are sold with their custom shop rifles.
The paint we use is an industrial grade, non-slip pebble finish similar to that found on power tools, office machines and industrial equipment. This polyurethane paint is the most durable we can find and is suitable for conditions found from the Arctic to the tropics. However, any painted finish will scratch when dragged over rocks, limbs and other hard surfaces. It is impervious to most gun cleaning solvents, but harsh solvents should be wiped off immediately.
Repainting an existing McMillan Stock
We can repaint any McMillan stock for our customers at a nominal charge.
Molded In Options
The colors below are used to create molded-in swirled marble, ambush, carbon ambush and camo finishes. Solid molded in colored stocks are not available from McMillan.
Molded in colors are the most durable finish we offer. With a molded finish, the color is impregnated into the gelcoat, or exterior surface layer of the stock. All of the molded-in finishes below should be considered utility-grade. Mold lines, sanding marks, fiberglass cloth and small imperfections may be visible.
Molded-in stocks are provided with a matte finish to minimize light reflection. After receiving your stock, some customers take it upon themselves to further wetblock sand and buff the surface to achieve a polished, warm luster finish. This is particularly attractive with marble patterns.
A molded-in stock will weigh several ounces more than a painted stock due to the additional resin material that is used.
We do our best to make your particular finish as attractive as possible. However, we are limited in what can be accomplished with molded-in colors. Solid colors, especially darker ones, produce the greatest challenge, whereas the camouflage patterns tend to look better because the various colors and shapes hide imperfections. Marbled colors offer the best choice for creating a finished look with a molded-in color.
A marble finish is created by swirling two or three different colors into the surface of the stock. The result is a beautiful effect that is unique to your stock. McMillan pioneered this finish, which has become a familiar hallmark of our brand.
Note that a marble finish can be used as an effective camouflage pattern when using olive green, black, gray and other common camo colors.
Each finish is done by hand and it is impossible to duplicate any particular marble pattern. Because marbling is created in the mold under pressure, patterns are random and not controllable. Specific vertical or horizontal patterns are not possible. Also, colors will change shades somewhat due to the mixing of colors while the swirling is done. Marble stocks may not be returned because of dissatisfaction with the color. However, you may opt to have us paint the stock at our regular price.
No two stocks are ever made alike as the marbling action is totally random in occurence.
The most popular marble finishes are shown here. Virtually any color combination is possible and some color combinations are inherently more pleasing than others
McMillan Uses Molded-In Colors to create a Unique Camouflage Finish. The colors are not painted on the surface, but are molded into the stock for durability when used in extreme environments. Many military units specify this finish for their tactical stocks, with the choice of colors dependent on the part of the world where the rifle will be deployed.
FREQUENTLY ASKED QUESTIONS
We make our stocks out of fiberglass or carbon fiber depending on the customers intended use. Each fiberglass stock is made of multi-layers of woven fiberglass cloth, laminated under pressure with epoxy resin. Our carbon fiber ultralight stocks are made with 100% carbon fiber cloth in the shell, instead of fiberglass, to assist with weight reduction.
Our stocks are filled with proprietary composite materials. We have several fill options that can be used depending on the customers intended use and the caliber their rifle is chambered in.
We are dedicated to making the best stocks money can buy. The material, time, labor, and quality control required to do so is reflected in the price of the stock. We are proud to say our stocks are used worldwide and made in America.
We produce finishes such as our camos, ambushes, and marble patterns that are molded into the shell of our stocks. Our molded-in finishes are a hand laid gel coat application, similar to those used in the manufacturing of boats.
We have found that our precision inletted stocks provide better than adequate accuracy without the application of bedding materials. However, the final determination is left up to the individual shooter. We no longer offer bedding services.
Due to the many options available to our customers, we price out all components and hardware separately. In doing so this ensures that our customers are only charged for the components and hardware that they want. For pricing questions please give us a call and one of our customer service representatives will be happy to help you.
Customer Service (623) 582-9635
Toll Free (877) 365-6148
With our large variety of stocks and options, lead times vary. Some of our more popular stocks can be finished and delivered in under 3 months. With our more complex stocks and components, times can reach 6 months.
For even faster delivery, our online retail store offers express custom inlet stocks in some of our more popular stock models. These stocks have a 6-8 week lead time. Please visit our Shop tab at the top of this page for express custom inlets.
McMillan offers our customers two ways to purchase a McMillan stock. Buy our most popular stocks in inventory in our Retail Store or select a McMillan special, one-of-a-kind stock offered on the individual stock pages.
For custom order stocks, please see the Buy Now Build Your Own tab for detailed information.
McMillan Fiberglass Stocks Order Form
Our price list is broken down into two basic sections where most stocks in that group are all priced the same. For the “Hunting and Sporting” type stocks look in the “hunting” section for the current price for a fully inletted blank. This price includes the color and finish of your choice.