The Pre-64 Monte Carlo is a factory duplicate stock. It has a raised comb suitable for use with a scope. This stock can be used for any Pre-64 or late Model 70 barreled action and will accept up to a #4 barrel contour.
- Available in right and left hand configurations
FN
- FN SPR – SHORT ACTION
- FN TSR – SHORT ACTION
WINCHESTER
- WINCHESTER MODEL 70
- WINCHESTER PRE 64
- WINCHESTER PRE WAR 64 CLOVER LEAF TANG
DROP AT COMB | 0.75” |
DROP AT HEEL | 0.938” |
DROP TO TOE | 6.75” |
FOREARM WIDTH | 1.6” |
GRIP TO TIP | 21.25” |
BUTT WIDTH | 1.7” |
BUTT FLAT | N/A |
GRIP WIDTH | 1.4” |
OVER ALL LENGTH | 31.75” |
LENGTH OF PULL WITHOUT PAD | 13” |
MAXIMUM ACTION DIAMETER | 1.35” |
MAXIMUM BARREL CHANNEL CONTOUR | #4 |
|
|
Colors and Finishes
Paint Options
- PAINT
For the finest presentation-grade surface, we suggest a painted finish. Seven solid paint colors are available.
Speckletone granite finishes are also available. Choose any solid base coat color and specify either one or two speckletone paint highlights to create an attractive custom finish.
When you order any paint finish, the underlying stock is hand-sanded, primed, and painted to eliminate all surface imperfections. This is the finish most manufacturers specify for the McMillan stocks that are sold with their custom shop rifles.
The paint we use is an industrial grade, non-slip pebble finish similar to that found on power tools, office machines and industrial equipment. This polyurethane paint is the most durable we can find and is suitable for conditions found from the Arctic to the tropics. However, any painted finish will scratch when dragged over rocks, limbs and other hard surfaces. It is impervious to most gun cleaning solvents, but harsh solvents should be wiped off immediately.
Transition Camo
McMillan’s Transition Camo is a highly durable paint finish that mimics the spray paint patterns favored by many snipers and hunters. It is currently available in 12 color combinations.
Repainting an existing McMillan Stock
We can repaint any McMillan stock for our customers at a nominal charge.
Molded In Options
The colors below are used to create molded-in swirled marble, ambush, carbon ambush and camo finishes. Solid molded in colored stocks are not available from McMillan.
Molded in colors are the most durable finish we offer. With a molded finish, the color is impregnated into the gelcoat, or exterior surface layer of the stock. All of the molded-in finishes below should be considered utility-grade. Mold lines, sanding marks, fiberglass cloth and small imperfections may be visible.
Molded-in stocks are provided with a matte finish to minimize light reflection. After receiving your stock, some customers take it upon themselves to further wetblock sand and buff the surface to achieve a polished, warm luster finish. This is particularly attractive with marble patterns.
A molded-in stock will weigh several ounces more than a painted stock due to the additional resin material that is used.
We do our best to make your particular finish as attractive as possible. However, we are limited in what can be accomplished with molded-in colors. Solid colors, especially darker ones, produce the greatest challenge, whereas the camouflage patterns tend to look better because the various colors and shapes hide imperfections. Marbled colors offer the best choice for creating a finished look with a molded-in color.
- Burgundy
- Grape
- Pink
- Red
- Orange
- Yellow
- Dark Green
- Medium Green
- Olive
- Light Green
- Woodland Beige
- Turquoise
- Dark Blue
- Medium Blue
- Light Blue
- Purple
- Black
- White
- Dark Gray
- Medium Gray
- Light Gray
- Dark Brown
- Medium Brown
- Light Brown
- Dark Tan
- Medium Tan
- Light Tan
- Neon green
- Tiffany blue
- MARBLE
A marble finish is created by swirling two or three different colors into the surface of the stock. The result is a beautiful effect that is unique to your stock. McMillan pioneered this finish, which has become a familiar hallmark of our brand.
Note that a marble finish can be used as an effective camouflage pattern when using olive green, black, gray and other common camo colors.
Each finish is done by hand and it is impossible to duplicate any particular marble pattern. Because marbling is created in the mold under pressure, patterns are random and not controllable. Specific vertical or horizontal patterns are not possible. Also, colors will change shades somewhat due to the mixing of colors while the swirling is done. Marble stocks may not be returned because of dissatisfaction with the color. However, you may opt to have us paint the stock at our regular price.
No two stocks are ever made alike as the marbling action is totally random in occurence.
The most popular marble finishes are shown here. Virtually any color combination is possible and some color combinations are inherently more pleasing than others
- CAMO
McMillan Uses Molded-In Colors to create a Unique Camouflage Finish. The colors are not painted on the surface, but are molded into the stock for durability when used in extreme environments. Many military units specify this finish for their tactical stocks, with the choice of colors dependent on the part of the world where the rifle will be deployed.
- AMBUSH
CARBON AMBUSH
- BANDED CARBON
FREQUENTLY ASKED QUESTIONS
We make our stocks out of fiberglass or carbon fiber depending on the customers intended use. Each fiberglass stock is made of multi-layers of woven fiberglass cloth, laminated under pressure with epoxy resin. Our carbon fiber ultralight stocks are made with 100% carbon fiber cloth in the shell, instead of fiberglass, to assist with weight reduction.
Our stocks are filled with proprietary composite materials. We have several fill options that can be used depending on the customers intended use and the caliber their rifle is chambered in.
We are dedicated to making the best stocks money can buy. The material, time, labor, and quality control required to do so is reflected in the price of the stock. We are proud to say our stocks are used worldwide and made in America.
We produce finishes such as our camos, ambushes, and marble patterns that are molded into the shell of our stocks. Our molded-in finishes are a hand laid gel coat application, similar to those used in the manufacturing of boats.
We have found that our precision inletted stocks provide better than adequate accuracy without the application of bedding materials. However, the final determination is left up to the individual shooter. We no longer offer bedding services.
Due to the many options available to our customers, we price out all components and hardware separately. In doing so this ensures that our customers are only charged for the components and hardware that they want. For pricing questions please give us a call and one of our customer service representatives will be happy to help you.
Customer Service (623) 582-9635
Toll Free (877) 365-6148
With our large variety of stocks and options, lead times vary. Some of our more popular stocks can be finished and delivered in under 3 months. With our more complex stocks and components, times can reach 6 months.
For even faster delivery, our online retail store offers express custom inlet stocks in some of our more popular stock models. These stocks have a 6-8 week lead time. Please visit our Shop tab at the top of this page for express custom inlets.
McMillan offers our customers two ways to purchase a McMillan stock. Buy our most popular stocks in inventory in our Retail Store or select a McMillan special, one-of-a-kind stock offered on the individual stock pages.
For custom order stocks, please see the Buy Now Build Your Own tab for detailed information.
McMillan Fiberglass Stocks Order Form
Our price list is broken down into two basic sections where most stocks in that group are all priced the same. For the “Hunting and Sporting” type stocks look in the “hunting” section for the current price for a fully inletted blank. This price includes the color and finish of your choice.
- Call 877.365.6148 to place your order
- Download the order form below and fax to 623.581.3825
- Or scan and email it to stocks@mcmillanusa.com
McMillan Order Form